STANDS

ULTI-PRO
"This is the daddy"
MCN Buying Guide Aug 2000

OPTIMUM STABILITY
OPTIMUM SECURITY
EASY TO USE
ONE PERSON OPERATED
UNOBSTRUCTED ACCESS TO THE REAR WHEEL
UNIVERSAL STAINLESS STEEL LIFTING PINS
DURABLE ZINC PLATED FINISH
PACKS FLAT FOR EASE OF STORAGE

Will the ULTI-PRO fit my bike?
The unique, tapered stainless steel lifting pins will locate in ANY swing arm pivot bolt with at least 6mm dia hole or recess in each end.
No need for adaptors in 90% of cases.
If required, one adaptor kit will be supplied free of charge.

AS EASY AS…

1 With the bike on its side stand, insert the left upright into the swing arm pivot…

2 hold the base and insert the right upright pin…

3 use the allen key supplied to secure the uprights…

4 fit the foot lever and its ready to go…

5 ease the bike upright while pushing down of the foot lever to lift into position…

6 finally, fit the back stop and it’s totally stable and secure.

NOW AVAILABLE:
‘ENDURO’ VERSION for taller Superbikes - Varadero, Tiger etc.
& DUCATI 999/749 SPECIFIC VERSION.

BMW R1100S (S SPORT)
Designed to fit the BMW this ULTI-PRO has all the attributes of its
big brother but picks up on the main stand provision for unobstructed
access to the rear wheel.

£99.00

BOOSTER HANDLE
Fits in seconds - this accessory for the ULTI-PRO provides easier operation.
Recommended for larger bikes that also have a relatively low swing arm pivot.
i.e Triumph Daytona, Honda Firestorm.

£23.45

Buy Ulti-Pro with Booster Handle £117.45

ULTI-MOTO - ‘The FULLY MOBILE ‘ workshop stand

FULLY MOBILE - Even with both wheels out!
ONE PERSON OPERATION - EASY TO USE
VERSATILE - 5 Height settings
VERY STABLE & SECURE - Unique locking base - The motorcycle can not be accidentally pushed off the stand.
DISMANTLES IN A FLASH & PACKS FLAT
DURABLE ZINC COATED FINISH
STAINLESS STEEL LIFTING PINS

Allows removal of rear suspension unit, front forks etc.
Some applications allow swing arm removal.
Custom built jack supplied with the kit to lift the front.

Accessories available include: Gantry and sling assembly to lift the front as an alternative to the jack supplied, clip on parts tray and Ultimate fixed base for use on work benches.

£199

ULTI-MATE - 'The STATIC BASE' Workshop stand

EASY TO USE
ONE PERSON OPERATED
DURABLE ZINC PLATED FINISH
STAINLESS STEEL LIFTING PINS
PACKS FLAT FOR EASE OF STORAGE
5 HEIGHT SETTINGS - The stainless steel pins can be located in the frame to allow complete rear wheel, suspension and swing arm removal in most cases.
UNIQUE LOCKING BASE - The motorcycle can not be pushed off the stand until you want to.
CAN BE USED ON MOST WORKBENCHES

The ULTI-Mate can be easily up rated to the ULTI-MOTO

£125

UP FRONT

Very easy one person operation. Packs flat for ease of storage. Durable Zinc plated finish. Universal fitting - no adapters needed. Will fit most Superbikes with a 10mm dia or larger hole up the steering stem. The stand offers two lift height options and finite adjustment to suit most motorcycles.

Allows unrestricted access to the front wheel, callipers, forks etc and full steering action - ideal for fitting steering dampers, checking bar clearances etc.

The stand must be used in conjunction with a workshop/paddock stand (or the motorcycles main stand) We recommend it to be used with our Ulti-Pro, Mate or BACK UP stand. It will work with most secure workshop or paddock stands.

£105

PoP uP - All stainless construction

ALL STAINLESS STEEL CONSTRUCTION
NO RUST, NO CHIPPED PAINT
ONE PERSON OPERATION
EASY TO USE
WIRE FEET PERMIT USE ON A SHORT WORKBENCH
LARGE NYLON WHEELS
SPINDLE / NUT STORAGE PINS

Fits most bikes that have two pinch bolts a teach end of the spindle.

BMW Boxer Cup version also available.

£55

Back uP - Stainless & Strainless

COMPACT - Less likely to trip you up. Easy to store.
EASY TO USE - Specifically designed for one person to use.
STAINLESS STEEL CONSTRUCTION - No chipped paint - No rust.
SECURE - Forks provide a very secure location.
WIRE FEET - For use on a work bench
VERY EASY LIFT
SPINDLE/NUT STORAGE PINS

ONLY £49.95

ONLY £22.95

EXTREME VALUE PADDOCK STAND

EXTREME VALUE
‘FORK’ TYPE REAR STAND
TOUGH STEEL CONSTRUCTION
TOUGH ‘GOLD’ COLOUR FINISH

ONLY £34.95

NWS BOBBINS
DURABLE BLACK NYLON
WILL NOT CORRODE
Supplied with stainless steel bolts.

£9.50 per pair

Buy with an NWS stand & SAVE £3.00

GRAB ONS

This product is unique to NWS.
If your swing arm does not have provision for bobbins, you need these. An ingenious, easy to use solution for use with the EV, NWS BacKuP or most other ‘fork’ type paddock stands.
GRABONS grip most box section swing arms.
Not intended for permanent fitment!

£17.50 per pair

Buy with an NWS stand & SAVE £5.00

SUPER SLIM VN-800 BOBBINS
Machined stainless steel bobbins specifically for the VN-800
(to clear the silencer)

£14.50 per pair

LAZEY PARKER - Pick it up & SHIFT IT!

The problem: Manoeuvring a motorcycle in a confined space:
The garage, drive way, living room or back passage!

The solution: Take steroids, perfect your 37 point turn technique, or equip yourself with a LAZEY PARKER.

The Lazey Parker makes the rear wheel and side stand totally mobile with minimal effort so, wether you want to swing the motorcycle across the end of the garage, turn it around or perform any otherwise strain inducing manoeuvres - the Lazey Parker is for you.

The Lazey Parker is fitted without moving the motorcycle (apart from easing it upright to position the side stand truck) and can be removed in an instant when the motorcycle is where you want it.

WHEELIE GOOD! - NWS Lazey Parker
If garage space at home is tight, the Lazey Parker is one of those products that you’ve been missing all your life! ................ Its simplicity itself to use........
Mark Pennington - Motorcycle Rider - BMF Magazine

IDEAL FOR MANOEUVRING: RETROS, ENDUROS, TOURERS, CRUISERS & SUPERBIKES

£139.95

BMW BOXER CUP STANDS

Originally developed for the UK Boxer Cup squad, these unique stands are now available in road and race versions. The race stand picks up via aluminium locating plates which are fitted in place of the pillion foot rest assemblies.

The road version locates in the pillion foot rest clevis.
Either can be used on your road going bike.
Both versions feature height adjustment to accommodate
the various suspension options.

Sturdy steel construction. Durable gold coloured finish. Easy lift, one person operation. Use with an NWS PoP uP for the ultimate workshop combination.

£149.00